Ten Hour OSHA Compliance Course

Participants will review major OSHA standards and have questions answered about OSHA procedures. Participants completing the 10-Hour Class will receive a certificate of completion

Program Contents:

  • Introduction to OSHA Standards
  • Personal Protective equipment
  • Walking and Working Surfaces
  • Material Handling
  • Means of Egress
  • Fire Protection
  • Electrical Safety
  • Machine Guarding
  • Hazardous Materials
  • Hazard Communication
  • Health Standards
  • OSHA Inspections and Citations

COMMENT: Generally, the employer identifies which ten (10) topics are applicable to the workplace. Training is then applied in one hour formats to each of the ten topics.

Who: This program is focused from the employee's point of view. After attending, participants begin a self evaluation of their daily approach to working safely. Persons working in industry are required to attend. Managers and supervisors may find the 30 HOUR Out Reach Program format more applicable.
Where: Central Delaware Training Academy
559 Otis Drive
Dover, DE 19901
voice 302-677-1534   fax: 302-677-1543

Thirty Hour OSHA Compliance Course

This course is designed for middle management and first-line supervisors. Again, the employer usually selects the ten most applicable topics, and training format focuses 3 hours of training per topic.

As above, participants will review major OSHA standards and have questions answered about OSHA procedures. Participants completing the 30-Hour Class will receive a certificate of completion.

CDTA also offers OSHA Courses in Permit Required Confined Space Entry, Trench Safety, Hazardous waste Management, HazWopper, Asbestos Abatement, and many other recommended OSHA Programs.

OSHA Asbestos Courses

Course Title

Course Length

Days

Hours
Class I Asbestos Worker Course 4 days 32 hours
The course covers all MAP requirements plus Type "C" air supply systems. The hands-on part of includes respirator care and servicing, Glove Bag removal, setting full containment, full suit up with pressure demand respirator and practicing a simulated abatement.
Class I Asbestos Contractor/Supervisor Course 5 days 40 hours
This course is for persons who oversee the asbestos abatement project and supervise asbestos work. The course includes the above material, taught from the supervisor's point of view, plus recordkeeping, safety, and supervisor techniques. It is also the minimum required for Competent Person training for either Class I or II Asbestos abatement work
Class II Asbestos Work 1 day 8 hours
This course is taught on an as-needed basis. In Delaware this category is a Class "B" worker or supervisor and requires 12/14 hours of training. before taking this course it is recommended that you confer with us.
Class III Asbestos Worker (Op. & Maint.) 2 days 16 hours
This course prepares persons whose work activities may disturb ACM with approved skills to minimize their exposure to asbestos fibers. This course meets the minimum requirements for Competent Persons in Class III and IV
Class IV (Asbestos Awareness) 1 day 2 hours
This course introduces concern to minimize asbestos fiber exposure to persons who perform clean-up work in buildings which contain Asbestos Materials.
Building Inspector Course 3 days 24 hours
This course prepares persons to identify ACM in buildings subject to AHERA rules. It also qualifies an individual to perform building inspections which meet the requirements of ASHARA.

Lead & Radon | Home Page | Asbestos | Customized Training | Schedule | Newsletter

Email: CDTA for more information.

559 Otis Drive, Dover DE 19901
voice: 302-677-1534
fax: 302-677-1543